Appearance: transparent semi-fluid body
Solid content: 28%-35%
Hardness after curing: 65-80A Surface drying time: 3-6 minutes
Full curing time: 24-48 hours
Glue: fully transparent soft plastic semiconductor
Features: no whitening, no brittleness, no yellowing, no hard odor, very small smell
Save: save at 10 degrees to 30 degrees
Use for:
B7000 adhesive can paste more materials, it can be used for metal, glass, ceramics, stone, bamboo, wood, cloth, leather, PE, PP, PVC, ABS, nylon, sponge, film, fabric, electronic components, plastics, rubber , Fiber, paper, mobile phone frame, LCD screen, middle frame, frame, bracket, etc. How to use:
1. Please read the product description carefully before use
2. Please do a small area experiment before using it in a large area
3. Please ensure that the surface of the adherend is clean and dry
4. The operating temperature should be between 18-32 degrees
5. After opening the lid of the product, please remove the residual glue on the lid pin in time to facilitate closing. 6. Wait for 2-3 minutes, align the two adherends and apply a little pressure. 7. Straighten it for several hours, 24 -Reach the best adhesive strength after 48 hours 8. When the product is not in use, cover the bottle to prevent the glue from curing after contacting air.
Solid content: 28%-35%
Hardness after curing: 65-80A Surface drying time: 3-6 minutes
Full curing time: 24-48 hours
Glue: fully transparent soft plastic semiconductor
Features: no whitening, no brittleness, no yellowing, no hard odor, very small smell
Save: save at 10 degrees to 30 degrees
Use for:
B7000 adhesive can paste more materials, it can be used for metal, glass, ceramics, stone, bamboo, wood, cloth, leather, PE, PP, PVC, ABS, nylon, sponge, film, fabric, electronic components, plastics, rubber , Fiber, paper, mobile phone frame, LCD screen, middle frame, frame, bracket, etc. How to use:
1. Please read the product description carefully before use
2. Please do a small area experiment before using it in a large area
3. Please ensure that the surface of the adherend is clean and dry
4. The operating temperature should be between 18-32 degrees
5. After opening the lid of the product, please remove the residual glue on the lid pin in time to facilitate closing. 6. Wait for 2-3 minutes, align the two adherends and apply a little pressure. 7. Straighten it for several hours, 24 -Reach the best adhesive strength after 48 hours 8. When the product is not in use, cover the bottle to prevent the glue from curing after contacting air.
Condition is "New". Shipped with USPS First Class.